Some special hardware settings exist that are user programmable. They should be set with the help of a skilled Technician from Global Electronics. Most of the special settings are not available through Axcys. They are only settable from within the latest version of DiagnostyX - the special Tech Tool used by Global to customize the system to meet your specific requirements.
PC No Poll - (NP) If the PC stops polling or the Remote device stops receiving polls from the PC to its specific address, for any reason, the on-board relay will fire causing the gate to open - assuming that the gate has power and is otherwise in operarable condition. User settable from 0 Seconds to 254 Seconds, where 0 Seconds disables feature (factory default).
Touch Pad De-Sensitizing - (TP) Allows the user to customize the sensitivity of the Touchpad. This is user settable from 0 to 254 Milliseconds where 0 Seconds disables feature (factory default).
Send Gate Code Max- This user settable feature allows you to set the amount of time (in Seconds) that the Keypad will wait for the PC to poll it and and reply with a an answer to a Access Code Request. This is user settable from 0 to 60 Seconds.
Gate Code Entry Timeout - (CE) This user settable feature allows you to set the amount of time (in Seconds) that the user has to enter a code into the Touchpad before the Greeting/Date/Time screens come up. This is user settable from 0 to 60 Seconds.
These settings can be retrieved using DiagnostyX and are also visible on the LCD of the Touchpad as follows:
Example:
LCD Shows: 485 CE NP TP
Comm Format Send Code Max Time No Poll Touchpad Desensitize