In General

 
  • Always use stranded wire.
  • Always use cable that has a shield with a drain wire.
  • Calculate voltage drops and select the correct gauge wire accordingly!
  • Use 18AWG stranded wire for transmitting DC Power from keypad to keypad
  • Use only RS485 Compatible wire.  See the section entitled “Data Wire Specifications”
  • Use no less than 20AWG stranded cable the has a shield and drain wire when your keypads are equipped with a 1200 Baud Modem.
  • Attach the Drain wire to the appropriate ground wire on the Remote Device ONLY.
 
Power Supply
Axcys EclypX and BasicX Digital Access Control Keypad require a regulated 18VDC @ 1000 mA (typical minimum).  Details appear below.   For new installations or re-wiring, Global Electronics,  recommends that you contact a certified installer, or Global to provide specific power/communications details for your particular site.  For a list of certified installation companies, please contact Global Electronics, Ltd. directly.
Power wiring (and Data Wire) may be daisy chained but keep in mind distance vs. voltage drop.  Also the more remotes on the same power supply, the larger the wire must be and the more current the supply must be capable of handling.