Global Electronics Test Tool - Diagnostyx

Global Electronics Test Tool - Diagnostyx
1

Main Control Panel

1. Main Control Panel
 
2

Address of Wired Device - Head End

2. Address of Wired Device - Head End
 
3

Select Control to work with

 
Select kind of device you what you want to work with.
4

Wireless Control Panel

4. Wireless Control Panel
 
Wireless Control Panel
5

Wireless Device Address

5. Wireless Device Address
 
6

Target Device Type

 
7

Send Command button

7. Send Command button
 
8

Response Condition

8. Response Condition
 
9

Contact Transmission Data

9. Contact Transmission Data
Displays what the Contact has transmitted to the Head End/System Controller and decoded.
 
10

En-Disable LED's option

10. En-Disable LED's option
 
11

Set Retrys (1-7)

11. Set Retrys (1-7)
 
12

Select Wireless Zone To Talk To

12. Select Wireless Zone To Talk To
 
Used only when sending commands TO a wireless device.  Default zone is 1.
13

Slot

13. Slot

Default is 3; does not need adjustment.
14

En Sw/Ch option

14. En Sw/Ch option
 
15

Set Wireless Device Address

15. Set Wireless Device Address
 
16

Alive Notice Hours

16. Alive Notice Hours
 
17

Enable Switch

 
 
Select  which contact switches to enable.  Multiple switches allowed only on multiplexed systems.
18

Switch Group

 
19

Set Sw Chk Interval option

19. Set Sw Chk Interval option
 
20

Set W_Zone option

20. Set W_Zone option
 
21

Show Response In Hex check

21. Show Response In Hex check
In most cases, this is never used outside of Globals Lab
 
22

Get Sw Chk Interval option

22. Get Sw Chk Interval option
 
23

Get Batt Voltage option

23. Get Batt Voltage option
 
24

Set RF Pwr option

24. Set RF Pwr option
 
25

Show All Detail check

25. Show All Detail check
In most cases, this is never used outside of Globals Lab